telephone: (425) 776 - 1880, fax: (425) 776 - 2760, e - mail: ple - sale s@pletronics.com o9a sm7700h series n n cmos compatible with tri - state output n n surface mount oscillators in ceramic package (7x5x1.9 mm) standard specifications: standard specifications: frequency range 1.500 mhz ? 69.999 mhz (consult factory for specific available frequencies) frequency stability over operating temperature range 50 ppm is standard, but 25 ppm is also available for certain frequencies. operating temperature range 0 - 70 c is standard, but can be extended to - 40 to +85 c for certain frequencies operable supply voltage (vcc) 5 volt 10% is standard, but 3.3 volt 10% also available symmetry (duty cycle) (see next page for definition.) 40/60 - 60/40% is standard, but 45/55% symmetry at 50% of vcc is also available. input current (icc) & rise & fall time (tr & tf) & jitter depends on frequency and output load. see next page. logic ?1? & logic ?0? (see next page) 90% of vcc min.; 10% of vcc max. output load 15 pf is standard. contact factory for heavier loads. tri - state output normal output when pin #1 is open (no connection); normal output when pin #1 is at logic ?1?; high - impedance output when pin #1 is at logic ?0?. packaging (see page r1, figure 4) 16 mm tape, 178 mm, 254 mm or 330 mm reel: 1000 parts per reel. for quantities <250: 100 parts per tray part numbering guide: part numbering guide: n n the pletronics part number for an sm7700h series oscillator consists of the following 3 elements: 1. overall frequency stability over operating temperature range: sm77 45 h: 50 ppm; sm77 44 h: 25 ppm 2. optional alphabet designator for special requirement: sm7745h y : standard specifications; sm7745h e : operating temperature range of - 40 to +85 c; sm7745h s : 45/55% symmetry at 50% of vcc (cmos); sm7745h v : operates at vcc = 3.3v (there are other alphabet designators not listed here.) 3. frequency of operation in mhz examples: sm7745hv - 50.000 mhz; sm7745he - 10.000 mhz; sm7744hy - 50.000 mhz n n when customer?s requirements are non - standard, a special engin eering part number will be assigned. (continued)
o9b pletronics inc., 19013 36 th ave. w., suite h, lynnwood, wa 98036 - 5761 usa sm7700h series input current (icc), rise and fall time with 15pf load & jitter icc (ma) tr & tf (ns) period jitter rms values contact factory frequency range (mhz) typical maximum typical maximum typical maximum 1.500 ? 10.999 5.0 10.0 4.0 5.0 11.000 ? 23.999 10.0 15.0 4.0 5.0 24.000 ? 29.999 15.0 20.0 3.0 5.0 30.000 ? 45.999 20.0 30.0 3.0 5.0 46.000 ? 69.999 37.0 45.0 3.5 4.5 recommended test circuit with cmos load waveform symmetry logic 0 (10% vcc max) 20% logic 0 80% logic 1 logic 1 (90% vcc min) gnd vcc t r t f 50% logic 0 50% logic 1 * cl (capacitive load): includes the input capacitance of oscilloscope. ** 0.01 m f external by - pass filter is recommended. package outline (not to scale): # 4 # 3 # 1 # 2 0.075 (1.9) max recommended land pattern 0.071 (1.8) 0.165 (4.2) 0.08 (2.0) 0.200 (5.08) 0.01uf pin connections connection pin enable/disable input 1 ground 2 output vcc 4 3 0.276 (7.00.2) 0.197 (5.00.2) 0.102 (2.6) 0.047 (1.2) .055 (1.4) 0.200 (5.08) inches (millimeters) october 2000
|
